Looking for a Job?

Apply Now

Machine Operator-Assembly 3

Published On: 11/7/2020
  • Job Order ID: 1945
  • City: Thomson
  • State: GA
Brief Description:

Local company hiring for Machine Operator positions. This role operates a machine which provides covers on seats used on agricultural equipment. Position works alongside two other operators to ensure parameters are met for the material and for the finished products. Schedule: 1st and 2nd shifts available

  • 1st Monday - Friday / 6:00am - 2:00pm
  • 2nd Monday - Friday / 2:00pm-10:00pm

Pay rate: $10.00

Function

  • Prepare for operations by gathering and wearing all necessary PPE
  • Select product from box and place on table
  • Select clips and place in designated slots on left side
  • Select clips and place in designated slots on right side
  • Flip product over on the table
  • Select switch and install ensuring prongs are facing down
  • Install retainer slip into switch
  • Flip product back over and place switch actuator into designated slots
  • Move product to Table 2
  • Select cushion from table 1 and move to Table 2
  • Spray adhesive on the top and bottom of the product
  • Stuff cushion into the pan by doing the bottom first and pushing to the top
  • Apply urethane sheet over the product all the way to the bottom of the cushion
  • Fold the bottom of the urethane sheet back and spray the bottom of the cushion and attach the sheet
  • Cut the plastic at the top of the cushion
  • Fold the urethane sheet down, spray the top of the cushion and apply urethane sheet to the cushion
  • Pass product to co-worker and repeat
  • Remove product from oven
  • Slide cover over the top of product, work the left corner and then the right.
  • Position middle of the cover to align with holes and place staples into the holes
  • Pull corners of cover and align top holes, placing staples in those areas
  • Pass product to Operator 2
  • Pull front corner and align it with textured side of the product; repeating for both sides
  • Reposition product and align the bottom portion and staple along textured side.
  • Flip product over, push drain tube through the hole in the cover and cushion
  • Place seat on the installation press
  • Turn knob on press to compress the seat, confirm the end of the drain tube is out of the seat
  • Place clamp tube on the end of the drain tube with pliers
  • Turn knob back to release the seat
  • Inspect the assembly to confirm all child parts are present, staples are present and without wrinkles or tears
  • Verify seat switch function with meter to ensure it is working
  • Flip seat and place two labels in the correct areas
  • Move product to Table 5, pull cover bag from roll and place over the top of seat and pull down
  • Flip seat on back and pull bag up
  • Place seat in the returnable area

As seen on Indeed.com

Requirement Note

  • High School Diploma or GED
  • Minimum of 1-year experience as a machine operator
  • Team player committed to working in a zero-harm workplace
  • Ability to pass a pre-employment drug screen and background check

Sizemore, Inc. is an EOE

64

Years in Business

3019

Candidates Hired in 2019

23,945,000

Sq Ft Cleaned Daily

21,568

Hours of Security Weekly